News -

Home / News (Page 11)

Wall thickness in manufacturing plastic moulds
08-11-2019
What is the wall thickness in the manufacture of plastic moulds? The thickness of the wall depends on the external force the product needs to bear, whether it is supported by other parts, the number of columns to be supp...
How long does it usually take to mould a mold
01-11-2019
Plastic mold 30~35 days Hardware mold 28~35 days Die casting mold 30~35 days Aluminum extrusion molding 15~20 days Blister mold 5~7 days Cutting die 1~2 days Open mold production process 1. Design scheme 2. Design plan 3...
Plastic molds in our daily lives
26-10-2019
Plastic molds are processes that force molten material into a mold or mold. The material is then cooled and the result is a hollow or hollow physical property on the injection mold. This process is used in almost all pla...
Process conditions for PC/ABS injection molds
19-10-2019
1. Process conditions of PC/ABS injection mold: Drying must be done before processing. The humidity should be less than 0.04%, and the recommended drying condition is 90~110 °C, 2~4 h; The melting temperature is 230~300 ...
Injection mold color processing
12-10-2019
There are always color requirements for the injection mold during the use of the mold, so how to deal with the color of the injection mold? The printing process of gravure goods color plastic packaging products, the prin...
Two reasons for the deformation of two-color plastic mold products
29-09-2019
Two reasons for the deformation of two-color plastic mold products 1. The shape of the product, especially the residual stress caused by the relationship between the forming shrinkage and the thickness of the product. 2....