Industry News - News

Home / News / Industry News (Page 2)

Overview and origin of stamping die and metal stamping
31-03-2021
Metal stamping (also called stamping) is a process in which flat metal is placed in a stamping die in the form of a blank or coil for stamping. The surface of the stamping die usually needs heat treatment to increase its...
Surface Treatment Technology in Die Casting Mould
25-03-2021
Die-casting molds are a large category of molds. With the rapid development of my country's automobile and motorcycle industry, the die-casting industry has ushered in a new period of development. At the same time, highe...
The experience of the mold factory, the defects in the mold heat treatment
18-03-2021
1. There are soft spots on the mold surface There are soft spots on the surface of the mold after heat treatment, which will affect the wear resistance of the mold and reduce the service life of the mold. cause 1) There ...
How to use plastic molds
10-03-2021
The surrounding tree mold is also known as the precast concrete tree pond cover mold. The different names used in the local area are also inconsistent. The editor here counts, there are called Shuweizi mold, tree grate m...
Specification for installation and adjustment of plastic molds
04-03-2021
1. Mold pre-inspection: Once the mold is installed with a plastic mold, inspection should be carried out to find quality problems in time, and repair the mold to avoid disassembly after being installed on the machine. Wh...
Will it be affected by temperature during plastic mold processing?
25-02-2021
Plastic mold temperature is a very important part of injection molding. If the temperature of the plastic mold is well controlled, the processed product will be a good product; and if the temperature of the plastic mold ...