News -

Home / News

The most important and decisive factor when choosing die steel
29-05-2020
Choosing materials is important. The chemical composition of steel is important. The higher the alloy composition of steel, the harder it is to process. As the carbon content increases, the metal cutting performance decr...
What matters need to pay attention to plastic Refrigerator mould customization
26-05-2020
1. The Refrigerator mould needs to install side locks (straight locks) on all four sides. If you cannot install the side lock, you need to install a taper lock, or a cone lock. The taper lock should be installed horizont...
Problems of mold insulation system design.
23-05-2020
Regarding the design of the mold insulation system, we will provide you with a detailed introduction below. 1. The detailed structure of the mold frame and core, the cooling water of the mold is very important, in order ...
Plastic shrinkage of plastic molds and its influencing factors.
15-05-2020
The characteristic of thermoplastics is that they expand after heating and contract after cooling. Of course, the volume will shrink after pressurization. In the injection plastic molding process, the molten plastic is f...
Eight factors affecting mold structure and mold individual system.
28-04-2020
1. Cavity layout. According to the geometric structure characteristics of plastic parts, dimensional accuracy requirements, batch size, mold manufacturing difficulty, mold cost, etc., determine the number of cavities and...
The four parts of SMC molding die accessories to be regularly maintained
11-04-2020
The SMC molding position of each SMC molded requires annual maintenance. Some SMC mold repair techniques can allow the effective operation of SMC mold components and prevent accidents. Regular maintenance of SMC mold par...